ACCESSORIES


CONNECT Series HP1 Stereo Headphones

  • Lightweight and comfortable design with soft foam earcups for extended listening comfort.

  • Wide frequency response produces clear highs and full bass.

  • 32 Ohm impedance.

  • 100 mW power handling capability.

  • 3.5 mm stereo plug.


SoundChecks

Lets you hear while protecting you from loud damaging noise.

You have to try these to believe them!


Live Sound • Concerts • Manufacturing

Warehouses • Sporting Events

Machinery (mowers, chainsaws, etc.) • Shooting Ranges


Whirlwind SoundChecks apply approximately 30dB of attenuation over the entire audio spectrum. Sonically tuned chambers act as an extension of the ear canal preventing the occlusion effect that occurs with traditional earplugs so that sound is uniformly reduced.

In other words, you hear everything you need to while your ears are protected from high sound pressure levels.
Pro Quality Performance
  • High noise reduction across all frequencies
  • No distortion of sound
  • Blocks harmful noise but allows speech and other useful sounds to be heard
Comfortable and Secure
  • Lightweight (less than 2 ounces!)
  • Adjustable head band
  • Comfortable for extended use
Increased Safety
  • High speech intelligibility
  • Hear shouts or warning signals
  • No need to remove hearing protection to have a conversation
Convenient
  • Folds for easy storage in shirt pocket
  • Drops around the neck while not in use

WT-1000 Tuner
The Whirlwind WT-1000 tuner is an economical and feature packed device.
  • Remarkably sensitive and stable for simple, easy tuning

  • Auto modes for chromatic, guitar, bass and violin as well as manual mode

  • Pitch adjustable from A=433 to A=447

  • LCD meter as well as sharp / flat LEDs

  • Auto power off

  • Tune from 1/4" input jack or built-in mic

  • Tilt-back stand

  • Powered by 2 AAA batteries

SNAKESKIN®


Braided monofilament provides a layer of extra protection for your cables. Also keeps fanouts tangle free.
Available in assorted sizes and colors and may be ordered as an option on most Whirlwind products.

SHRINK SLEEVING

This is high-grade, mil-spec polyolefin heat shrinkable tubing. Shrunken size is approximately half of original diameter. Our standard color is black, with red, blue, white, and clear available in 3/16" and 3/8" sizes.

Model Diameter Model Diameter
PT1/8 1/8" PT1/2 1/2"
PT3/16 " 3/16" PT3/4 3/4"
PT1/4 1/4" PT1 1"
PT3/8 3/8" PT1-1/2 1-1/2"


STAGE TAPE



Standard 60 yd. X 2" stage tape in black, white or silver.


BOARD MARKING TAPE



1" wide for marking channels on the console, leaves no residue.


PIGBAGS


These heavy-duty nylon bags with Velcro closures protect cable ends. The PIGBAG-S is ideally suited to small fanouts and the MASS multipin connectors. The PIGBAG-L is large enough for any size fanout.

STRAIN RELIEF GRIPS

SR
Use these heavy-duty, 3-piece wire mesh grips and strain reliefs for mounting multipair cable to a steel box.
Model For Use with Box Cable O.D. Min Cable O.D. Max Hole Punch Dia.
SR-1/2 BB06, BB09 .37" .54" .812"
SR-3/4 BB12, BB16, BB20, BB28, BB32 .54" .73" .1.062"
SR-1 BB40 .73" .97" 1.312"


HANGER GRIPS


Hangers
These heavy duty wire mesh hangers are designed for fanouts.
Model Cable O.D. Min. Cable O.D. Max
HG-1 .37" .56"
HG-2 .56" .73"
HG-3 .73" .85"
HG-4 .85" 1.00"


RACK HARDWARE KIT

The RMH-100 is a bag of 100 10-32 x 3/4" black screws with non-isolating nylon washers to mount and protect equipment in standard 19" racks and protect the faceplates from marks caused by screw heads.

Click Here For Our Rack Panel Section