MASS PUNCH SYSTEM


MASS PUNCH PANELS


MASS Punch Front
MASS Punch Rear
Punchdown panels are an ideal way to terminate your multipin MASS connectors. Developed by ADC and Whirlwind, the 58-channel MASS Punch has terminated thousands of MASS connectors with a solid gas-tight connection system that accommodates 22, 24, or 26 ga. solid or stranded wire and permits easy rerouting of wires in the field.

ADC's Quick Connect Punchdown (QCP) technology completely eliminates tinning and soldering, resulting in significantly faster setup and maintenance times.

Catalog Number
MPP 1 2 3
Match number to chart

NUMBER OF CHANNELS
1
12 - 12 channels, 2 rack spaces
28 - 28 channels, 2 rack spaces
58 - 58 channels, 3 rack spaces

TYPE OF CONNECTORS
2
W1C - up to 12 channels
W2C - up to 20 channels
W5CRP - up to 16 channels
W6CRP - up to 28 channels
W3C - up to 40 channels
W3CRP - up to 40 channels
W4C - up to 58 channels
W4CRP - up to 58 channels

WIRING CONFIGURATION
3
1 - to a single connector wired as output (female for W1,W2)
2 - to a single connector wired as input (male for W1,W2)
3 - to two output connectors, paralleled (female for W1,W2)
4 - to one output and one input connector, paralleled (one each M/F W1,W2)
5 - to two input connectors, paralleled (male for W1, W2)



MASS, MINI, AND MICRO PUNCH BLOCKS


We have three members of our punch block family. The 58 channel MASS Punch, the 28-channel Mini Punch and the 16-channel Micro Punch.

The multiple mounting hole sets permit easy mounting on standard hole centers and included tie wraps can be used to dress incoming wires.

All three punchdown panels work with our QB-2 spring-loaded or QB-115 manual punchdown tool.
MASS Punch Mini Punch Micro Punch
MPB-58
58 channel MASS Punch 		MPB-28
28 channel Mini Punch 		MPB16
16 channel Micro Punch

Optional mounting kits are available:
(Includes 3" standoffs, screws, nuts and washers)

MPB16MH - for MPB-16
MPBMH - for MPB-28 and MPB-58


PUNCHDOWN ACCESSORIES
The QB-2 and QB-4 punchdown tools ensure "gas tight" termination. By orienting the tool and punching, you can punchdown and cut away excess wire.

The QB-2LT is the replacement tip for the QB-2 tool and QCP II terminals.
The QB-4LT is the replacement tip for the QB-2 tool and MKIV QCP terminals.
If you are on a tight budget, the QB-115 and QDF-114 are low-cost punchdown tools. They are not spring-loaded.



Model Description
QB-2 Impact tool for MKII panels
QB-4 Impact tool for MKIV panels
QB-2LT Replacement tip for QB-2
QB-4LT Replacement tip for QB-4
QB-115 Manual tool (not spring loaded) for MKII panels
QDF-114 Manual tool (not spring loaded) for MKIV panels
QRK-25 QCP replacement kit includes 25 red, white, and black QCP housings, 12 blue and orange housings, 100 split cylinder contacts
QRK-25-MKIV Replacement kit includes 10 red, white, blue and orange loaded 1x8 QCP IV housings and contacts.
PPH Patch cord holder, holds up to 75 cords.