This unit features Whirlwind's typical bullet proof construction utilizing a Medusa® Mini-6 style stage box wired with CAT-5e snake cable to Neutrik Ethercons® and Snakeskin®on the fanout.
Fan to Fan CAT-5e snake cable with Neutrik Ethercons® and Snakeskin®on the fanouts.MTD-0-4-C5E-(Length)Example for 100' snake: MTD-0-4-C5E-100
NO LONGER AVAILABLEThe Whirlwind CI2L converts 2 analog line level channels of audio to CobraNet digital networked data.
This handy box takes the Neutrik Cat 6 NE8MC6-MO Ethercon and adapts to work with the NE8MC-B or NE8MX-B ethercon.
Catdusa is a 4 channel analog snake box that uses shielded Cat5 cable instead of traditional multipair cable.Each channel has paralleled male and female xlrs, allowing for greater flexibility. The two Neutrik Ethercon RJ45s (IN/THRU), let you daisy chain multiple boxes. If shielded Cat5 cable is used, Catdusa can pass phantom power and DMX. The Mini stage box design means Catdusa can be placed almost anywhere.Minimum 2 Catdusa boxes required.
This handy box takes two of the Neutrik Cat 6 NE8MC6-MO Ethercon and adapts to work with two of the NE8MC-B or NE8MX-B ethercon.
Modular - uses up to 2 of the same I/O cards as the original E SnakeUse cards in any combination: 2 input , 2 output or 1 of each for up to 16 channelsIntegrated Power Supply
Built with ruggedized CAT-5e cable and terminated with Neutrik Ethercon® connectors.
Built with ruggedized CAT-5e shielded cable and terminated with Neutrik Ethercon® connectors.
Ethercon to Ethercon Shielded Tactical CAT6A Cable. Inner conductors are 24AWG-stranded.Available in 2, 3', 6', 10', 15', 20', 25', 30', 50', 100', 150', 200', 250', 300'.Part # ENC6ASE + length (ex. ENC6ASE025 for a 25 foot cable)Compatible with Cat6a and Cat5e Ethercon only
ESP1 powers individual E Snake Frames or can be used as redundant power for E Snake 2
Introducing the new Whirlwind Front Of House cable, FOH1! This cable has AC, 2 Cat6a, 2 audio lines, and a quad fiber all housed in a rugged, easy to coil tour-grade jacket! Only from Whirlwind!
The Whirlwind Qbox-aes is a multipurpose testing device for troubleshooting digital AES-3, S/PDIF and analog audio signals. The Qbox-aes is composed of two sections; the Send section and the Receive/Monitor section. A Test Mode switch selects Analog or AES testing operation. In AES test mode the Receive section consists of the LED sample rate indicators and the decoder that converts the digital signal into analog for the Speaker and the Line/Phones monitor. The digital Send section converts a choice of analog input signals into AES-3 professional and S/PDIF digital format and delivers them to the output connectors through Send Level and Sample Rate controls. An AES Function switch determines how the AES testing occurs. The Send/Receive test operates as described above and the Inline Monitor position allows the Qbox-aes to be inserted inline in an AES stream for real time monitoring.In Analog test mode the Qbox-aes is similar in operation to the Whirlwind Qbox. The XLR connectors are used to send and receive analog audio signals. Mic, Oscillator and Aux signals are controlled by the Send level control and sent out the male XLR. The female XLR receives analog input and delivers it to the Speaker through the Volume control. A three position switch allows the selection of a balanced input or unbalanced pin 2 or pin 3 to be monitored separately and Phantom LEDS indicate the presence of phantom power at the male XLR. Power is supplied by 4 AA batteries or the included wall power supply (model # PS6).