This unit features Whirlwind's typical bullet proof construction utilizing a Medusa® Mini-6 style stage box wired with CAT-5e snake cable to Neutrik Ethercons® and Snakeskin®on the fanout.
Fan to Fan CAT-5e snake cable with Neutrik Ethercons® and Snakeskin®on the fanouts.MTD-0-4-C5E-(Length)Example for 100' snake: MTD-0-4-C5E-100
This handy box takes the Neutrik Cat 6 NE8MC6-MO Ethercon and adapts to work with the NE8MC-B or NE8MX-B ethercon.
The CatMaster incorporates 6 Neutrik EtherCON connectors terminating to color-coded tails. The tails exit through grommets so they may be retracted into the panel. Tails can be dressed to length for a neat appearance and unused tails can be pushed back and out of the way.
Catdusa is a 4 channel analog snake box that uses shielded Cat6 cable instead of traditional multipair cable.Each channel has paralleled male and female xlrs, allowing for greater flexibility. The two Neutrik Ethercon RJ45s (IN/THRU), let you daisy chain multiple boxes. If shielded Cat6 cable is used, Catdusa can pass phantom power and DMX. The Mini stage box design means Catdusa can be placed almost anywhere.Minimum 2 Catdusa boxes required.
Catdusa CT-F and CT-M are recent additions to the Catdusa family. Like other Catdusa products, they use Cat cable to transmit four channels of analog audio. Both have a Neutrik Ethercon connector broken out to four XLRs on 18 inch tails. They are wired with 110 ohm cable to maintain AES and DMX performance when using shielded Cat cable. Using shielded Cat cable also allows phantom power to pass for condenser microphones. The CT-F has four female XLRs, while the CT-M terminates to four male XLRs, and the CT-MF has 4 interchangable (male/female) XLRs.. They can be used together to create a simple 4 channel fan to fan snake, or they can be combined with other Catdusa pieces to create a flexible and comprehensive stage sub snake system. Check out our entire Catdusa family, and find out what RJ45 solution works best for you!
Our 2 space CATDUSA-2R conveniently houses two Catdusas. NOTE* RACK KIT ONLY, Catdusas sold separatly.
CatdusaDMXRJ45 to 5 pin XLR Breakout Box The Whirlwind CatdusaDMX uses five pin XLR connectors instead of 3 pin to provide a dedicated way to use Cat5 or Cat6 Ethernet cable for transmitting DMX lighting control. Plug a CatdusaDMX box onto each end of a cable terminated with RJ45 connectors and use 5 pin DMX cables to connect to equipment. Pins 4 and 5 of the XLR connectors are not wired, so four universes are possible and conversion from 5 pin to 3 pin can be achieved by using a standard Catdusa box at one end.There are four circuits on the CatdusaDMX box, using the four twisted pairs of the Cat cable. Each circuit has male and female 5 pin XLR connectors allowing for easy bidirectional signal configurations. Two RJ45 jacks wired in parallel are provided for daisy-chaining applications.
The Whirlwind Catformer is a four channel RJ45 input box. Each channel features a Neutrik combo connector, and can be either a mic or DI input with the simple flick of a switch. The Catformer has 1/4" feedthru connectors for the DI inputs, with ground lift switches to eliminate hum, and a Neutrik Ethercon output jack.
The Data Snake offers the same features as our Medusa Standard series with the addition of 2 lines of Cat 6 bundled within 6, 12, and 20, pair cable with SnakeSkin® on the fanouts for ultimate fanout protection, Metal chassis mount XLR connectors, and a Pig Bag® to protect the fanouts during storage or when not in use. Pictured left are just a few examples of the many configurations available.
This handy box takes two of the Neutrik Cat 6 NE8MC6-MO Ethercon and adapts to work with two of the NE8MC-B or NE8MX-B ethercon.
Built with ruggedized CAT-5e cable and terminated with Neutrik Ethercon® connectors.