Mic, Speaker, and Guitar Stands, Cases and Accessories

Mic, Speaker, and Guitar Stands, Cases and Accessories

Mic Stand Accessories

Rack Lightning Rack Lights

Board Marking Tape

1" wide for marking channels on the console, leaves no residue.

CLAMP MIC CLIPS

These clamps can attach to just about anything, holding most mics in perfect position. They thread into any standard thread (5/8"-27) mic stand. When you keep all three handy with the rubbernecks below, you have a mounting system that will hold a mic just about anywhere.

Cyclone Utility Cases

When we build anything from a concert splitter, to a full blown power distro, it breaks our hearts to load it into a sub par flight case. Well that was precisely our motivation in creating the CycloneTM case series from Whirlwind. We picked the finest Colson® casters, flush mounted MOLTM latches and built it around our Marine grade HDPE panels resulting in a road worthy, incredibly sturdy road case that won’t soak up water, and rot like traditional cases that are made with plywood.

GB-3 Grav Bags™ Ballast Bags

TRIAD-ORBIT Grav Bags are unique weighted 'shot bags' that can be used individually (3.3 lbs) as 'booties' on leg ends or combined (10 lbs) as center weight to stabilize mic stands in heavy traffic areas or precarious positions.

HARD RUBBER MIC CLIP

These heavy-duty, flexible 5/8"-27 thread mic clips are so durable, they will outlast any other clips in your inventory. a

Hanger Grips

These heavy duty wire mesh hangers are designed for fanouts.

IO Quick-change Coupler Mounting Head

IO-H quick-change mounting heads securely connect microphones, booms and miscellaneous accessories to TRIAD-ORBIT advanced microphone stand system components. The IO-H1 features the industry-standard 5/8-inch male mounting thread and an optional 3/8-inch BSW adaptor for universal compatibility.Purchase multiple IO-H heads to equip your entire mic collection with TRIAD-ORBIT quick-change technology.

IO-A1 / IO Equipped Short Telescopic Boom Arm

IO-A telescopic boom arms allow users to custom-configure a number of T-O products to adapt to a multitude of tasks in seconds.

IO-A2 / IO Equipped Long Telescopic Boom Arm

IO-A telescopic boom arms allow users to custom-configure a number of T-O products to adapt to a multitude of tasks in seconds.

IO-C / IO Equipped Clamp

Mounting Clamp with IO Quick-Change Coupler.IO-C mounting clamps are purpose-built for attaching Triad-Orbit IO-equipped adaptors, boom arms, tablet holders and assorted accessories to stands, trusses, tabletops and other parallel surfaces..

IO-R Retrofitable Quick-change Coupler

The IO-R provides instant compatibility between conventional mic stands, boom arms and mic clips and TRIAD-ORBIT advanced microphone stand system components. The IO-R features the industry-standard 5/8-inch female mounting thread and an optional 3/8-inch BSW adaptor for universal compatibility. IO-H quick-change mounting heads provides instant compatibility between conventional mic stands, boom arms and mic clips and TRIAD-ORBIT advanced microphone stand system components. The IO-H features the industry-standard 5/8-inch mounting thread and an optional 3/8-inch BSW adaptor for universal compatibility

IO-R/6TM

Six-pack of IO-R quick-change couplers. Great for converting conventional stage and studio stands to T-O compatibility. Purchase extra IO-H mounting heads to outfit booms, microphones, photo & video cameras and lighting devices.

IO-VMTM

IO-VMTM- T-O’s VESA MIS-D class mount optimized for 12” to 32” video displays. IO-VM VESA mounts come bundled with Triad-Orbit’s innovative OATM orbital boom arm. Pair with Triad T2/T3C tripods, IO-C clamps or IO-W wallplates for new support solutions

IO-W / IO Equipped Wall Plate

IO-W Wallplate / Desktop Mount with IO Quick-Change Coupler.IO-W Wallplate provides a stable platform for mounting Triad-Orbit IO-equipped microphone adaptors, boom arms, tablet holders and assorted accessories to flat surfaces including walls, ceilings and desktops.

MICRO1 / M1-R - Retrofitable Hanging Mic Adaptor

M1-R Adaptors are retrofittable versions of MICRO 1 Orbital Hanging Mic Adaptors, exhibiting the same enhanced range of motion, thanks to the unique ball swivel mechanism. Equipped with industry standard 5/8-inch threads, M1-R can exponentially increase the accuracy and versatility of any microphone stand.

MICRO2 / M2-R - Retrofitable Mic Adaptor

M2-R Mic Adaptors feature the exclusive Compass Point™ ball swivel housing that solidly secures mics in any position and reduces setup time for those who need precision microphone placement. M2-R functionality can be added to any conventional mic stand or boom using the industry standard 5/8-inch thread.