The AB-8 is an 8-channel, balanced, bi-directional signal switcher, 1 in - 2 out or 2 in - 1 out per channel.
The Canare BCJ-XJ-TRB (XLR-F to BNC) and BCJ-XP-TRB (XLR-M to BNC) adapters are a cost-effective solution for long cable runs over coaxial cable as opposed to the attenuation of twisted pair at digital frequencies.
This table top stereo, active, compact headphone amplifier provides headphone volume control for broadcast applications, recording studios, language labs, etc.
The Whirlwind HATT-AES is an active headphone amplifier that converts a digital AES3 stream into a high fidelity, low distortion stereo headphone signal optimized for modern 32 Ohm headphones. Sample rates from 32 kHz to 192 KHz are recognized by the HATT-AES D/A converters. Features include an analog 3.5mm TRS stereo input jack, analog signal present LEDs, and a buffered AES loop-thru output.
The HATT4 is a sonically superior, four output stereo headphone amplifier. The outputs deliver clean, high power signal capable of driving any modern type of earbuds or headphones. Each output is driven by a high fidelity, low distortion, class AB stereo amplifier controlled with a front panel volume pot. Both ¼” and 3.5mm headphone jacks are provided, wired in parallel.
This table top, active, mono balanced compact headphone amplifier provides headphone volume control for broadcast applications, recording studios, language labs, etc.
The HB1XL is a professional quality, single station, passive headphone monitor. One stereo power amplifier can drive multiple units for distributed headphone applications.
Input a line signal into a mic pre or match levels between two pieces of gear with these precision in-line H-pads.
The ISO-2 is a two channel isolation box and line balancer.As an isolation unit, use it to isolate lines to press and video feeds or on-stage power amps. It's a handy hum and buzz fighter for broadcast or live sound applications.As a balancer, it converts unbalanced lines from CD players, tape decks, etc. to balanced for long cable runs.
Sometimes a ground lift isn't enough to do the job. The ISO-8 is a valuable part of systems where different pieces of gear are connected across long lines.
Ideal for troubleshooting ground problems, this female-to-male XLR 3-pin inline device disconnects pin 1 between the connectors. It isolates the ground of a balanced audio signal without requiring you to cut the cable's shield wire.
This handy tool balances and isolates a single line level signal or lets you send a line level signal to two destinations with transformer balancing and isolation for one or both of the outputs.
Some mixers have 1/4", unbalanced inputs designed for high impedance mics and won't accept standard balanced, low impedance microphones. Video
The whirlwind LM2C is a passive device that allows the connection of professional dynamic microphones or line level audio sources to the unbalanced stereo mic level inputs on video cameras or laptop computers. High quality audio transformers isolate the camera or computer from the input sources.