These patent-pending wall frame assemblies with recessed panels provide greater protection for connectors while enhancing the appearance of your installation. Two sizes fit 8" x 8" and 12" x 12" standard NEMA type 1 electrical backboxes and there are two standard connector panel recess depths, 1" and 2.5".• 12" frame with locking door is available as flush mount version only in 1" or 2.5" depths.
The Whirlwind WFSD12X1KIT and WFSD12X2.5KIT are surface mount, hinged door assemblies attached to a matching 12”x 12” NEMA Type 1 style back box. These units provide an attractive, locking door enclosure with a recessed connector panel inside the back box. Two recess depths are available: 1” and 2.5”. A blank connector mounting plate (part# WFI12X12) is included with the complete assembly. Whirlwind can also punch, load and engrave identical panels that replace the one included, ready to wire and install for contractor convenience.The WFSD12 enclosure is almond in color, the 12x12" back box is 4" deep and has no conduit knockouts. Back box mounting holes are added by the installer to suit the application.MODEL # WFSD12X1KIT for 1” recess behind doorMODEL # WFSD12X2.5KIT for 2.5” recess behind door
The Whirlwind WFFD12X1KIT and WFFD12X2.5KIT are flush mount, hinged door assemblies that attach to a 12”x 12” NEMA Type 1 box. These units provide an attractive, locking door for Whirlwind wall frames that recess connector panels inside the backbox. Two recess depths are available: 1” and 2.5”. A blank connector mounting plate (part# WFI12X12) is included with the complete assembly. Whirlwind can also punch, load and engrave panels that fit into the wall frame enclosure, ready to wire and install, for contractor convenience. The outside dimension of the door bezel is 14”x14”. MODEL # WFFD12X1KIT for 1” recess behind doorMODEL # WFFD12X2.5KIT for 2.5” recess behind door SELECT BACKBOX DEPTH TO ALLOW FOR SUFFICIENT CLEARANCE BEHIND CONNECTOR PANEL