Breadcrumbs:

Wall Plates

Product Type
Product Family
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

ROK-2 Remote Outlet Controller

The ROK1 and ROK2 are UL listed devices that provide a convenient way to turn power on and off for remotely located equipment that consumes power even while not in use. They are ideal for controlling AC power to projectors, video displays, powered loudspeakers, lighting fixtures, etc. The ROK1 switches single phase 120 VAC and the ROK2 is used for switching single phase 240 VAC or two legs of 208 VAC three phase. Both devices are rated for switching 20 amp AC branch circuits.The devices are activated by a user provided, maintained dry contact closure which energizes the relay coil with an internally generated 24 VDC control voltage. Any type of single pole maintained switching, mechanical or programmable GPIO, with a current rating of at least 100 mA  can be used to operate the ROK1and ROK2. Two18-24 AWG control wires complete the circuit between the switch and either ROK device. Multiple units can be activated from a single switch by paralleling the control connections and ensuring that the wiring and control switch are rated for the additional relay coil current loads.Both units are packaged with decorator style faceplates and can be installed in standard electrical boxes or mounted at equipment locations along with receptacles in multigang boxes. Single gang installation of the ROK1 or two gang mounting of the ROK2 requires a 3.5" deep gangable type box or utility box with an extension ring. Multigang installation with outlet receptacles requires at least 2.5" depth behind the faceplate. In boxes less than 3.5" deep with conduit fittings, space constraints dictate that wire entry can not be directly behind either ROK device.The ROK1 and ROK2 are UL listed as Industrial Control Switches, ANSI/UL 508 and CSA C22.2 No. 14-13 standards for the direct control of nonmotor-rated loads.

ROK1- Remote Outlet Controller

The ROK1 and ROK2 are UL listed devices that provide a convenient way to turn power on and off for remotely located equipment that consumes power even while not in use. They are ideal for controlling AC power to projectors, video displays, powered loudspeakers, lighting fixtures, etc. The ROK1 switches single phase 120 VAC and the ROK2 is used for switching single phase 240 VAC or two legs of 208 VAC three phase. Both devices are rated for switching 20 amp AC branch circuits.The devices are activated by a user provided, maintained dry contact closure which energizes the relay coil with an internally generated 24 VDC control voltage. Any type of single pole maintained switching, mechanical or programmable GPIO, with a current rating of at least 100 mA  can be used to operate the ROK1and ROK2. Two18-24 AWG control wires complete the circuit between the switch and either ROK device. Multiple units can be activated from a single switch by paralleling the control connections and ensuring that the wiring and control switch are rated for the additional relay coil current loads.Both units are packaged with decorator style faceplates and can be installed in standard electrical boxes or mounted at equipment locations along with receptacles in multigang boxes. Single gang installation of the ROK1 or two gang mounting of the ROK2 requires a 3.5" deep gangable type box or utility box with an extension ring. Multigang installation with outlet receptacles requires at least 2.5" depth behind the faceplate. In boxes less than 3.5" deep with conduit fittings, space constraints dictate that wire entry can not be directly behind either ROK device.The ROK1 and ROK2 are UL listed as Industrial Control Switches, ANSI/UL 508 and CSA C22.2 No. 14-13 standards for the direct control of nonmotor-rated loads.

Breadcrumbs:
Catalog
>
Panels, Plates, Boxes and Floor Pockets
>
Wall Plates
Subcategories:
Filters:
Product Type
Product Family
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Products:
MIP Wall Plates
Media Input Plates (MIP)
WP1/1FF
One gang
punched
WP1/1FNS
One gang
punched
WP1/1H
One gang
punched
WP1/1MNS
One gang
punched
WP1/1MW
One gang
punched
WP1/1NDH
One gang
punched
WP1/1NL4
One gang
punched
WP1/1QW
One gang
punched
WP1/2FNS
One gang
punched
WP1/2H
One gang
punched
WP1/2MNS
One gang
punched
WP1/2MW
One gang
punched
WP1/2NDH
One gang
punched
WP1/2NL4
One gang
punched
WP1/2QW
One gang
punched
WP1/OH
One gang
unpunched
WP1B/1FW
One gang
punched
WP1B/1H
One gang
punched
WP1B/1MNS
One gang
punched
WP1B/1MW
One gang
punched
WP1B/1NDH
One gang
punched
WP1B/1NL4
One gang
punched
WP1B/1QW
One gang
punched
WP1B/2FNS
One gang
punched
WP1B/2FW
One gang
punched
WP1B/2H
One gang
punched
WP1B/2MNS
One gang
punched
WP1B/2MW
One gang
punched
WP1B/2NDH
One gang
punched
WP1B/2NL4
One gang
punched
WP1B/2QW
One gang
punched
WP1B/IFNS
One gang
punched
WP1B/OH
One gang
unpunched
WP1WH/0
One gang
unpunched
WP2/0H
Two gang
unpunched
WP2/1FW
Two gang
punched
WP2/1H
Two gang
punched
WP2/1MW
Two gang
punched
WP2/1NDH
Two gang
punched
WP2/1NL4
Two gang
punched
WP2/1QW
Two gang
punched
WP2/2FW
Two gang
punched
WP2/2H
Two gang
punched
WP2/2MW
Two gang
punched
WP2/2NDH
Two gang
punched
WP2/2NL4
Two gang
punched
WP2/4FW
Two gang
punched
WP2/4H
Two gang
punched
WP2/4MW
Two gang
punched
WP2/4NDH
Two gang
punched
WP2/4NL4
Two gang
punched
WP2/4QW
Two gang
punched
WP2B/0H
Two gang
unpunched
WP2B/1FW
Two gang
punched
WP2B/1H
Two gang
punched
WP2B/1MW
Two gang
punched
WP2B/1NDH
Two gang
punched
WP2B/1NL4
Two gang
punched
WP2B/2FW
Two gang
punched
WP2B/2H
Two gang
punched
WP2B/2MW
Two gang
punched
WP2B/2NDH
Two gang
punched
WP2B/2NL4
Two gang
punched
WP2B/2QW
Two gang
punched
WP2B/4FW
Two gang
punched
WP2B/4H
Two gang
punched
WP2B/4MW
Two gang
punched
WP2B/4NDH
Two gang
punched
WP2B/4NL4
Two gang
punched
WP2B/4QW
Two gang
punched
WP2B/IQW
Two gang
punched
WP2WH/0
Two gang
unpunched
WP3/OH
Three gang
unpunched
WP3B/OH
Three gang
unpunched
WP3BS/0
Three gang
unpunched
WP3WH/0
Three gang
unpunched
WP4/0H
Four gang
unpunched
WP4B/0H
Four gang
unpunched
WP4WH/0
Four gang
unpunched
WP5B/0H
Five gang
unpunched
WP5H/0
Five gang
unpunched
WP6/0H
Six gang
unpunched
WP6B/0H
Six gang
unpunched
WP7/0H
Seven gang
unpunched
WP7B/0H
Seven gang
unpunched
WPIDWH/2ND
One gang
punched
WPIEBK/2ND
One gang
punched
WPX1/0H
One gang
unpunched
WPX1WH/0H
One gang
unpunched
WPX2/0H
One gang
unpunched
WPX2B/0H
Two gang
unpunched
WPX2WH/0H
One gang
unpunched